“I use all the three ranges in my production. I have been using the standard grades for years.
The new CS grade gives excellent results on the difficult color change, and the liquid product is very easy and quick to use on our big cast extruder.”
- Jim Stansfeld -
“I really appreciate Ultra Plast HT-CS. We work mainly with high-tech polymers, and not so many purging compounds can work at high temperatures.
Until two years ago we were convinced that it was unavoidable to have smell and smoke during purging. Now thanks to the HT-CS we have excellent cleaning result and at the same time no smell and smoke in production.”
- James Lee -
"Everybody is scared to inject a purging compound in the mold, especially when producing preforms. We had bad experiences with many purging compounds, so we always cleaned the hotrunners with production PET.
As we cannot get rid of the white stripes of titanium dioxide when changing color from white to clear, we tested the Ultra Plast PET-S.
I was really astonished of how easy the procedure was! The machine was cleaned in 5 shots.
Now we are using Ultra Plast in almost all the color change, saving a lot of scrap production."
- Steve Brown -
“We were visiting Fakuma exhibition. We stopped just in front of the ULTRA SYSTEM stand. When they proposed us to test their purging compound I explained them that I tested so many purging compounds... but I never found one of them working properly.
However, why not try another one?
Well. Now I found the one working properly.”
-Rolf Müller-
English
Español 